MagnaClip | Magnetic Cord Management System
$74.95
Magnetic Dock Cord Management
Keep Dock Cords Organized, Secure and Out of Sight
MagnaClips provide a clean magnetic cord management system for
organizing power cords, extension cords, lighting cables and other
waterfront wiring without permanently fastening the cord itself to your
dock.
Install the ferritic steel mounting brackets using the included
marine-grade adhesive or customer-provided screws. The magnetic cord
holders then snap onto the brackets, holding your cords where you want
them while still allowing quick removal.
- Keeps dock cords tidy, secure and out of walkways
- 10 MagnaClips and Ferritic Steel Mounting Brackets
- Approximately 20 lb magnetic pull strength
- Fits cords up to 1 inch in diameter
- Multiple smaller cords can fit inside one holder
- Marine-grade adhesive included
- Rubber-coated magnets for waterfront use
20 lbApprox. magnetic pull strength
1"Maximum cord diameter
2 WaysAdhesive or screw mounting
SeasonalQuick removal & reinstall
Simple Cord Management for Your Dock
A Cleaner Way to Route Waterfront Wiring
Loose cords can hang from dock framing, cross walking surfaces or remain
exposed around waterfront equipment. MagnaClips give you a dedicated
place to secure those cables while keeping the installation clean and
easy to access.
01
Keep Cords Tidy
Route loose cords along the dock instead of allowing them to hang,
cross walkways or remain exposed around waterfront equipment.
02
Adhesive or Screws
Install the ferritic steel brackets with the included marine-grade
adhesive or use customer-provided screws when a mechanical mounting
method is preferred.
03
20 lb Magnetic Hold
Approximately 20 lb of magnetic pull strength keeps each holder firmly
connected to its steel mounting bracket during normal use.
04
Seasonal Dock Ready
Pull the magnetic holders from the brackets at the end of the season
and leave the clips attached to the cords for faster setup next year.
Magnetic Release
Strong Enough to Hold, Designed to Release Under Extreme Tension
MagnaClips use approximately 20 lb of magnetic pull strength to hold
cords against the ferritic steel mounting brackets.
If a cord becomes caught or placed under unusually high tension, the
magnetic holder can separate from the bracket instead of remaining
permanently locked to the dock.
This magnetic release point can help reduce excessive strain on cords,
plugs, connections, dock framing and connected waterfront accessories.
Flexible instead of permanently locked in placeThe cord stays captured inside the MagnaClip while the magnetic
holder can detach from the mounting bracket if enough force is
applied.
holder can detach from the mounting bracket if enough force is
applied.
Recommended dock placementInstall MagnaClips behind dock rails, framing or other protected
areas whenever possible to keep wiring organized and less visible.
areas whenever possible to keep wiring organized and less visible.
Made for Waterfront Environments
Built Around Dock and Waterfront Cord Management
MagnaClips combine magnetic convenience with materials selected for
repeated use around docks and waterfront equipment.
Ferritic Steel Brackets
The mounting brackets provide the steel surface required for a strong
magnetic connection while helping address corrosion concerns.
Rubber-Coated Magnets
The magnetic bases are protected by a rubber coating that helps shield
the magnets from moisture, weather exposure and corrosion.
Hidden Installation
Mount the brackets behind dock rails or framing to keep extension
cords, lighting cables and equipment wiring tucked away.
Quick Access
Magnetic mounting allows cords to be removed or repositioned without
repeatedly unscrewing traditional permanent cord clips.
Fits Cords Up to 1 Inch
Organize One Large Cord or Multiple Smaller Cables
Each MagnaClip accommodates cords up to 1 inch in diameter. Multiple
smaller cords can also be captured in the same holder when several
cables need to follow the same path along a dock.
- Power cords
- Extension cords
- Lighting cables
- Waterfront equipment wiring
- Multiple smaller cables in one holder
Ideal for dock and waterfront wiringUse MagnaClips wherever you need a removable cord-management point
along suitable dock framing or another surface capable of accepting
the mounting bracket.
along suitable dock framing or another surface capable of accepting
the mounting bracket.
No need to permanently fasten the cord itselfThe steel bracket remains on the dock while the MagnaClip stays
attached to the cable, allowing the cord assembly to be removed
independently.
attached to the cable, allowing the cord assembly to be removed
independently.
Easy Seasonal Storage
Leave the MagnaClips Attached to Your Cords
When dock equipment comes out for the season, separate the magnetic
holders from the steel brackets and leave the MagnaClips on the cords.
When the next season begins, your clips are already positioned. Return
the equipment to the dock and snap the magnets back onto their mounting
brackets.
Install the brackets once.The seasonal process eliminates the need to remove and reinstall
individual cord clips every year.
individual cord clips every year.
Magnetic Dock Cord Management
A Simple, Cleaner Way to Manage Dock Cords
MagnaClips organize dock power cords, extension cords, lighting cables
and other waterfront wiring without permanently attaching the cord
itself to the dock.
Mount the brackets once, leave the holders on your cords during seasonal
storage and snap everything back into place when your waterfront
equipment returns.
Additional information
| Weight | 2.00 lbs |
|---|
You must be logged in to post a review.
-
AquaThruster™ Lake Muck Blower & Weed Blaster
From: $1,549.98
-
Dual Outlet Outdoor Wi-Fi Enabled Smart Plug - Manage Timer from your Smartphone
$39.95
-
360 Oscillator Attachment For Aqua Thruster
From: $949.00
-
Bottom Frame For 360 Oscillator Aqua Thruster
Price range: $315.00 through $574.00
Reviews
There are no reviews yet.